Basic Sheet Metal Fabrication Workshop
Join Us at Fuller Moto for Full-Bore LIVE! - Basic Sheet Metal Fabrication Workshop
After performing several welding workshops around the country over the last few years, Full-Bore Instructors, Mark Prosser and Bryan Fuller have decided to add basic sheet metal design and construction to the mix. This Workshop will combine the TIG welding process with sheet metal construction. If you aspire to repair the rust holes in your old car, cut up that cafe racer tank or build a tail section from scratch, this workshop will get you started with the solid foundation to begin your project with confidence and see it through.
- Affordable Tools
- The Design Process
- Creating Accurate Patterns
- Moving the Metal
- Shrinking and Stretching Techniques
- Hammers and Dollies
- TIG Welding
- Metal Finishing
- Working with Aluminum and Steel
- Bead Rolling
- English Wheeling
- Planishing Hammer Basics
- Making Your Own Tools
This two-day Workshop will get you started off on the right foot with design and construction techniques that will get that project moving forward. Bryan and Mark create an excellent laid back learning environment that will surely get you excited to get out there and build something. For additional questions regarding this Workshop, please contact us at firstname.lastname@example.org and we will gladly assist you.
Breakfast, lunch and beverages will be served. Workshop days are from 8am - 5pm both Saturday and Sunday. Lots of giveaways and other swag will be given out to all who attend.